Eccotemp i12-NG Natural Gas Indoor Tankless Water Heater Horizontal Bundle

Eccotemp i12-NG Natural Gas Indoor Tankless Water Heater Horizontal Bundle

This bundle includes the i12-NG Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" Horizontal vent kit.

The Eccotemp i12-NG has a new revolutionary design, making it unlike any other tankless water heater on the market today. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. Rated at an impressive 3 GPM, the Eccotemp i12-NG Tankless Water Heater is a natural gas fired, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. This model also offers a 35-40 degree Fahrenheit temperature rise when operating at flow rate of 3 GPM and a 77-degree Fahrenheit temperature rise at 1.5 GPM. The Eccotemp i12-NG is perfect for vacation cabins, cottages, and smaller homes.This bundle comes with a horizontal stainless steel vent kit, ready to install and with its 120-volt UL listed power cord powering the internal exhaust fan and digital display.  It only pulls about 2 watts idle and 1.07 Amps during operation, making it an ideal energy efficient appliance.

Some additional Features:

Sleek modern design
Tempered glass front panel
Child locking technology
LED temperature display
True 1/2" NPT water fittings
Manual water temperature controls
Natural Gas Powered
3 GPM flow capacity
Power ventilation for safety, efficiency, and venting options
Tested-Safe Electronic ignition system
Fully independent gas and water controls
Fully automatic temperature and water flow adjustment
Uses gas only when hot water is on
Requires standard household 120-volt electric outlet
UL listed electrical components
Field tested to 5500 ft. elevation (not recommended to be used any higher)
Energy factor: 79%
Hot water capacity range: 0.6 - 4.8 GPM
Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

Eccotemp i12-NG Dimensions:

Height 25"
Width 14"
Depth 5"
Weight approx. 29 lbs.
Shipping weight 30.7 lbs.

What's Included:

Stainless steel vent kit
120 volt UL listed power cord
2.5"-3" Stainless steel adapter
3" Horizontal Vent Kit
2-year manufacturer warranty
2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with a backflow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Horizontal Vent Kit 3"

This 3" single walled Z-Flex Horizontal vent kit is for horizontal installations only. You will need to purchase additional Z-Vent straight pipe. You will need to determine how many additional feet as well as need a condensation drain. Also, remember a max vent run of 20' subtracting 4' for every 90 Degree elbow in the run.

(1) Termination Hood with backflow preventer
(1) 3" x 90 Degree Elbow
(1) 3" x 1' Pipe
(1) 3" Wall Thimble
(1) 3" Appliance Adapter