Additional Photos
(click to enlarge)

Description

Why select this Port A Cool?  The PAC2K16HPVS features at a glance: Suitable for cooling in spaces up to 1,000 square feet 16'' diameter fan Adjustable dial for fan speed settings 1/3 horsepower motor Air & Water is an authorized Port A Cool dealer - buying from us ensures that you have a recognized purchase, telephone support, and a valid warranty.  Port A Cool Evaporative Cooling Units are Manufactured by Port A Cool, LLC., Center, Texas U.S.A.

Designed for use when air conditioning is cost prohibitive, impractical, or unavailable. The Port A Cool PAC2K16HPVS Evaporative Swamp Cooler effectively cools manufacturing plants, mechanics garages, military bases, and gymnasiums. Provides effective spot cooling in horse stables, dog kennels, and a variety of other locations along with certain types of equipment such as generators and compressors. Shipped assembled and ready to operate, right out of the box Just connect the Port A Cool PAC2K16HPVS to a 115V power supply, attach your water supply and let the cooling begin! You can set up your Port A Cool in a stationary location, or purchase and install the optional heavy duty rolling cart to make it fully portable. Air is pulled through the water-soaked Kuul® pads by the powerful 4,000 CFM fan, and cold air is rapidly pushed forward. High Quality, made in the USA construction The Port A Cool PAC2K16HPVS Portable Swamp Cooler, as with all Port A Cool products, are designed and constructed here in the USA with long term dependability and efficiency in mind. Variable speed fan has an adjustment dial to set the output. Units feature durable one-piece polyethylene plastic housing and high-tech polymer venturi with quieter-running, non-corrosive fan blades. Plus, these units are very inexpensive to run - just cents per day! Environmentally friendly with efficient and effective resource use.

Port A Cool Evaporative Cooling Units are manufactured by Port A Cool, LLC., Center, Texas U.S.A.

Due to the size and nature of this commercial grade evaporative cooler, all returns will be subject to a 20% restocking fee. Moreover, shipping prices are difficult to predict real-time during the checkout process since these units are shipped freight - this shipping price is just an estimate. If we are able to get a better shipping price than what is quoted during the checkout, we will pass the savings on to you! You can trust that you will receive fair honest customer service with the guaranteed lowest price!

Q. IS THERE ANY ASSEMBLY REQUIRED?
A: No. Port A Cool units are ready to use right out of the box.

Q. HOW DO I PREPARE MY Port A Cool UNIT FOR STORAGE?
A: Simply drain the unit, dry out the pads and place the unit, preferably covered, in a dry place for the winter season. For more details, please click on "Port A Cool unit Maintenance" below.

Q. WHAT IS THE BEST ENVIRONMENT FOR THE Port A Cool UNIT TO PRODUCE THE MOST COOL AIR?
A: For optimum performance, the temperature should be 85 degrees F or higher and the relative humidity should be below 75%. However, Port A Cool units will reduce the temperature in almost any environment, making it more pleasant.

Q. WHAT IS THE DIFFERENCE BETWEEN EVAPORATIVE COOLING AND MISTING SYSTEMS?
A: Misting units spray a shower of water into the air that will collect on a person, getting the person wet. The Port A Cool unit uses the evaporative process to produce cooler air.

Q. HOW OFTEN DO PADS HAVE TO BE REPLACED?
A: Depending on the quality of maintenance and frequency of use, pads typically last up to five years. However, should you have any questions about the life of the pads for your unit, please call our tech support department for more detailed information about replacing your pads.

Q. WHAT IS THE AMOUNT OF MOISTURE PRODUCED BY A UNIT?
A. Approximately 2% to 5% increase in humidity is produced depending on the temperature and humidity of the environment. This amount of increase in humidity is not noticeable in a ventilated area where the air produced by the unit is exhausted.

Q. HOW LONG WILL THE WATER SUPPLY LAST IN THE SUMP TANK?
A. With no direct water source available, the unit will evaporate the water in a filled sump tank within two hours of operation. The evaporation rate will vary depending on temperature and humidity. A water source for refilling the sump tank is recommended by the manufacturer. Every unit has an internal float valve for regulating water flow into the sump.

Q. SHOULD I USE ICE IN THE SUMP TANK FOR BETTER COOLING?
A. Some of the vapor from the ice water may be picked up and distributed by the fan, but this does not increase evaporation and therefore will not produce significant cooling.

Read About Port A Cool Evaporative Coolers

The Port A Cool product line has enjoyed consistent growth since their introduction into the marketplace in 1991.  Port A Cool products are manufactured by Port A Cool, LLC, in Center, Texas, and the company is recognized as an industry leader.

Port A Cool, LLC, selected Center, Texas, for the home office of several of their divisions and manufacturing locations. Nestled in the beautiful piney woods of East Texas —150 miles southeast of Dallas, 120 miles northeast of Houston and 17 miles west of the Louisiana border, this small town still maintains the look, feel and hospitality of the original community, while also enjoying the modernization provided in large part to the manufacturing and technological advances attained by Port A Cool, LLC.

Port A Cool, LLC products are respected in both the United States and international marketplaces. These products range from those used primarily in agricultural and horticultural applications, to mobile, modular and portable buildings, cargo trailers and many variations of evaporative cooling products with virtually unlimited uses

With a strong network of distributors, Port A Cool, LLC continues to expand into worldwide market horizons and produce outstanding sales revenues, all from the beautiful setting of Center, Texas.