Additional Photos
(click to enlarge)

Description

The MovinCool Classic 10 Portable Air Conditioner is one of the lowest power usage spot coolers in the MovinCool line. It uses a standard household plug in connection, so its great for both commercial and residential use. The versatile Classic 10 is instantly ready to provide cool air in very warm environments such as production lines, outdoor events, manufacturing processes, injection molding, metal forming and much more where ambient temperatures are up to 104°F. The MovinCool Classic 10 features a mechanical temperature controller allowing the user to "set" the desired temperature.

Costs as little as ten cents per hour to run! The MovinCool Classic 10 is inexpensive to run, self contained and portable! By cooling only the area that needs it, the Classic Plus 10 portable air conditioner saves you money while protecting people and equipment, and speeding up processes. Requiring little to no installation, just roll it in, plug it in and turn it on! MovinCool offers optional accessories for the Classic 10 that will allow you to duct the hot air into a drop ceiling, automatically pump the condensation up to 20' away, or direct the cool air to remote or dual areas! Read below for more information.

MovinCool - We've got you covered.

With the MovinCool line of portable air conditioners and spot coolers, you can focus cool air exactly where it's needed. What your central air-conditioning doesn't cover, the MovinCool will. When your built-in system is down or during off hours, MovinCool will keep the environment comfortable at a fraction of the cost. In fact, a temperature drop of 20-30 degrees Fahrenheit can be achieved in only minutes. Compared to operating a central system, the cost to spot cool drops dramatically - averaging less than 25 cents per hour.

MovinCool's Office Pro line of products are designed for optimal performance in offices, or for computer networking and telecom rooms. The Office Pro's programmable digital controls make it perfect for automatic after-hours and weekend operations.

If you have a significant investment in electronic, computer and telecommunications equipment, MovinCool is an inexpensive insurance policy. Whether it's used as an emergency backup or to offset the heat generated by equipment, it pays for itself the minute it's turned on.

MovinCool's Classic / Classic Plus line of products are manufactured to provide the best possible performance in high temperature and/or high humidity environments like manufacturing plants and warehouses. Ranging in sizes from 10,000 to 60,000 Btu/hr, there's a size to fit any solution. If you need more precise temperature control, the Classic Plus Series offers the same benefits as the Classic Series, plus digital temperature controls.

In manufacturing, MovinCool's spot cooling will speed up your process when material is too hot to handle or package. When people are exposed to hot operations such as welding, brazing or ovens, spot cooling will make a difference in productivity and quality that's easily measured. Using our variety of flexible ducting accessories, customized spot cooling solutions extending over 80 feet are quick and easy.

Auto condensate removal: Why bother with emptying the drain tank when you can install a condensate pump to remove the water automatically? This pump has an 18' lift capacity to reach virtually any remote drain. With the condensate pump installed, drainage is automatic and access to the compartment is no longer necessary. A cover plate can then be added to conceal and protect the pump.

Condenser air removal: To exhaust the warm condenser air above the work area, attach the warm air flange and duct to the top of the unit. When using MovinCool inside an office, simply replace the ceiling tile with the MovinCool ceiling tile and insert the duct to exhaust the warm air. No special tools or equipment are required for the installation.

Remote Cooling: The amount of air supplied to remote areas can be quickly and conveniently increased by attaching 10' extension ducts directly over the standard ducts. For more permanent installations, use the flange and clamp to secure the extension ducts to the unit. Each duct can be extended 30 to 60 feet from the unit, depending on the model. Add trim rings to the end of the extension ducts to give a finished look and keep the ducts from unraveling. The dual duct accessory can be used to divide each 5" nozzle opening into two 4" outlets to multiply your cooling options.

The MovinCool line of portable air-conditioners are built to last decades, and they have the track record to prove it. Thousands of MovinCool units are celebrating their 15th anniversary of service. With special acrylic resin coated coils, thermostatic controls and its rugged, proven design nothing comes close to the versatile MovinCool.