Q-Mark 2542W Electric Baseboard Heater with Easy Knockouts
(click to enlarge)
- Offers Convenient Wiring for Easy Installation and 400 Watts of Heating Power
- FREE GROUND SHIPPING!
- Read More...
Customers Also Viewed
Description
The Q-Mark 2542W electric baseboard heater is the perfect heater for any room in the house. It warms spaces effectively and operates quietly. Set this heater in virtually any room and it won't disturb you.
400 Watts
The Q-Mark 2542W electric baseboard heater offers 400 watts of heating power to effectively warm a 40 sq. ft. area. This heater is ideal for any bedroom, den, or office setting.
Easy Controls
The Q-Mark 2542W electric baseboard heater includes easy to use manual controls. Simply turn the dial to start the heater, nothing could be easier.
Clean Finish
The Q-Mark 2542W electric baseboard heater features a Navajo white neutral finish that's complementary to virtually any decor. This heater looks great in any setting.
Convection Heating
The Q-Mark 2542W electric baseboard heater features convection heating that's ideal. This heater warms effectively and spreads heats evenly around the room. Convection heating is ideal for covering a widespread area.
Specifications
- Model: 2542W
- Product Type: Electric Baseboard Heater
- Product Dimensions: L: 2.90" x W: 24.00" x H: 6.80"
- Product Weight: 5.00 lbs.
- Product Color: Navajo White
- Application: Provides supplemental heating for residential use
- Type: Baseboard
- Warranty: 1-year limited manufacturer's warranty on parts and labor; 10-years on heating element
- Fuel Type: Electric
- Voltage: 240 volts
- Coverage Area: 40 square feet
- Watts: 400 watts
- Amps: 1.7 amps
- Frequency: 60 Hz
- Certifications: UL
- Heating Element: Sheathed Electronic Heating Element
- Heating Capacity: 1365 BTUs
- Finish: Navajo White
- Construction: Metal
- Hardwired: Yes
- Remote Control: No
- Control Type: Dial
- Fin: Yes
- Fin Type: Chimney
- Thermostat Required for Use: Yes
- Thermostat Must Be Purchased Separately: Yes
- Automatic Cut-Off Fetaure: Yes
- Low Surface Temperature: No
- Safe to Mount Against Walls: Yes
- Flooring Types Recommended For Use: Carpet , Hardwood , Laminate , Tile
- Portable: No
Benefits
- Built in safety thermal cut-off protection for added safety
- Navajo white enamel finish is compatible with all interiors
- Operates quietly without popping and pinging
- Stands unsupported during installation
- Warms up to 40 sq. ft. of space
- Wired for easy installation
Optional Accessories Available For The QMark Baseboard Heater 240 Volt Models
120-277 Volt Single Pole Thermostat TA2AW: Single pole thermostats break only one side of the power line to your heater and cannot be turned ''off.'' Therefore, power is continuous to the heater even if it is not running. The control knob will have a low temperature setting without an ''off'' position. These thermostats generally have a temperature range of 40 to 90 degrees.
120 Volt Duplex Receptacle RA1W: An optional accessory that attaches and makes an additional two plug outlets for any baseboard heater.
120-277 Volt Double Pole TA1AW: A "Double Pole" is an older term for a switch that allows you to turn both sides of the filament on and off - actually turning it completely off making it much safer than leaving it always energized. Double pole thermostats should be used for zonal heat systems such as electric fan heaters, baseboard heaters, and radiant heaters.
Double Pole Wall Thermostat MD26: The same as a double pole, but is able to be wall mounted.
120-277 Volt Two Pole Tamper-Proof Thermostat TA2TPAW: A standard two pole thermostat but with a tamper proof guard that resembles a small disc covering, which is only removable with a screwdriver. Once it is off, an inside stem is clearly visible. This is then rotated with a screwdriver or with your fingers.
Inside Corner ICAW: Allows two baseboard heaters to be set up next to each other on walls that are at a right angle to each other. If you were standing in the corner, the point of the corner would point away from you.
from Rockville, MD
