AllerAir's air purifiers utilize a five-stage filtration technology to trap and remove the pollutants
How the AllerAir high efficiency air purifier system worksAllerair air cleaners use a 4 phase filtering system.in the order that the air passes through them they are: the pre-filter, the Mass Activated Carbon Bed (MAC-B™) filter,the 2 anti-microbial filters and the HEPA filter. 1) The pre-filter traps larger dust particle and is easily removed and cleaned with a vacuum cleaner. It acts to stop the larger particles such as dust and lint from clogging the other filters. 2) The mass activated carbon bed (MAC-B™) filter adsorbs gases and odors. (Adsorb: no it's not a typo. This is the process by which activated carbon captures gases and odors.) Most off the shelf air cleaners have a few token ounces of carbon sprayed on the pre-filter. This is only sufficient to capture a small amount of the noxious gases and odors in the air and for only a short period of time. The MAC-B carbon filter has pounds of activated carbon (from 7 to 160 lbs.) that will trap 90% of gases and odors that pass over it and will continue working for many months before needing to be replaced. 3) The 2 anti-microbial filters kill the airborne microbes that pass through them. 4) The HEPA filter
traps the airborne particles.
These filters were developed by the Atomic Energy Commission to trap
radio-active particles. They can capture 99.97% of particles as small as 0.3
microns. That is as small as some bacteria. The power of activated carbonactivated carbon is the only safe, cost effective way to trap noxious gases and odors What it does and how it works. The technology used in military gas masks Adsorption Most off the shelf cleaners have only a few token ounces of
carbon sprayed on a mesh. Interested in learning how air purifiers work? Then visit our Air Purifier information page. It includes all kinds of purification information including how HEPA filters work, how ozone purifiers work, and more. |










